Hombre S Regular Cab 4WD V6-4.3L (1999)
Parking Brake Shoe: Adjustments
Park Brake Shoe Adjustment
The park brake must be adjusted any time the park brake cables have been replaced or disconnected, if the park brake shoes have been replaced or if
under heavy foot pressure the pedal travel is less than half the pedal total travel. Before adjusting the park brake, check the condition of the service
brakes.
1. Raise the vehicle and support the vehicle with safety stands.
2. Remove the wheel and tire assembly.
3. Remove the caliper.
4. Remove the rotor.
5. Remove the park brake cable from the park brake lever.
6. Adjust the shoe diameter using the adjuster nut.
7. Turn the adjuster nut clockwise in order to increase the diameter until the rear wheel will not rotate without excessive force in a forward
direction.
8. Connect the park brake cable to the park brake lever.
9. Install the caliper.
10. Install the rotor.
11. Install the wheel and the tire.
12. Adjust the rear park brake cables.
13. Lower the vehicle.
