Hombre S Regular Cab 4WD V6-4.3L (1999)
Vacuum Brake Booster: Service and Repair
Vacuum Brake Booster
Vacuum Brake Booster Replacement
Removal Procedure
1. Apply the parking brake.
2. Remove the master cylinder away from the vacuum booster. Refer to Master Cylinder, Brakes, Service and Repair; Removal and Installation.
3. Support the master cylinder.
4. Disconnect the vacuum hose from the vacuum booster.
5. Remove the left closeout insulator panel.
6. Remove the pushrod retainer from the brake pedal pin.
7. Remove the stoplamp switch. Unsnap the switch from the brake pedal pin.
8. Remove the pushrod from the brake pedal pin.
9. Remove the steering column support bracket.
