Hombre S Regular Cab 4WD V6-4.3L (1999)
10. Remove the vacuum booster mounting nuts.
11. Remove the vacuum booster assembly.
12. Remove the gasket.
Installation Procedure
1. Install the vacuum booster assembly and the gasket.
2. Install the vacuum booster mounting nuts on the vacuum booster.
Tighten
Tighten the vacuum booster mounting nuts to 40 N.m (30 lb ft).
3. Install the steering column support bracket.
4. Position the pushrod on the brake pedal pin.
5. Install the stoplamp switch to the brake pedal pin. The switch will snap in place.