isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Valve Cover|Service and Repair|Page 1621 > < Rocker Arm Assembly|Description and Operation|Page 1617
Page 1
background image

Valve Cover: Service and Repair

Valve Rocker Arm Cover Replacement (Left)

Removal Procedure

1. Remove the air cleaner outlet duct from the throttle body. 
2. Remove the air cleaner assembly.

3. Remove the PCV valve hose assembly from the valve rocker arm cover.
4. Disconnect the engine coolant temperature (ECT) sensor.
5. Partially drain the engine coolant. 
6. Remove the radiator inlet hose from the water outlet. 

7. Remove the exhaust gas recirculation (EGR) valve inlet pipe from the intake manifold and the exhaust manifold.

Important:  A/C compressor and bracket removal is not necessary.

Valve Cover|Service and Repair|Page 1621 > < Rocker Arm Assembly|Description and Operation|Page 1617