Hombre S Regular Cab 4WD V6-4.3L (1999)
8. Remove the bolts and the valve rocker arm cover.
9. Clean all sealing surfaces.
Installation Procedure
1. Install the valve rocker arm cover and bolts.
2. Install the exhaust gas recirculation (EGR) valve inlet pipe into the intake and exhaust manifolds.
1. Tighten the EGR valve inlet pipe intake manifold nut to 25 N.m (18 lb ft).
2. Tighten the EGR valve inlet pipe exhaust manifold nut to 30 N.m (22 lb ft).
3. Tighten the EGR valve inlet pipe clamp bolt to 25 N.m (18 lb ft).
