Hombre S Regular Cab 4WD V6-4.3L (1999)
Installation Procedure
1. Slide the power steering pump mounting bracket onto the stud and the power steering pump.
2. Install the power steering pump mounting bracket three bolts and the nut.
Tighten the power steering pump mounting bracket bolts and nut to 41 N.m (30 lb ft).
3. Install the three bolts for the power steering pump.
Tighten the power steering pump to power steering pump mounting bracket bolts to 50 N.m (37 lb ft).
4. Install the power steering pump pulley.
5. Install the air conditioning compressor, if equipped.
6. Install the drive belt idler pulley if not equipped with A/C.
7. Install the drive belt.
8. Install the engine cooling fan.
9. Install the air cleaner outlet duct.