Hombre S Regular Cab 4WD V6-4.3L (1999)
13. Remove the bolt attaching the remote engine oil filter lines to the remote engine oil filter lines (engine mounted) adapter.
14. Remove and discard the seals.
15. Clean all of the components in a suitable solvent, and dry them with compressed air.
16. Inspect the fittings, the connectors, the cooler lines, the cooler, the filter lines, and the remote filter adapter for damage, distortion, or restriction.
Replace parts as necessary.
17. Flush the engine oil cooler, the engine oil cooler lines, the remote engine oil filter adapter, and the remote engine oil filter lines with the same type
of engine oil normally circulating through the engine.
Installation Procedure
1. Install new seals on both ends of each remote engine oil filter line.
2. Install the bolt attaching the remote engine oil filter lines to the remote engine oil filter lines (engine mounted) adapter.
Tighten the bolt to 35 N.m (26 lb ft).
3. Install the bolt attaching the remote engine oil filter lines to the remote (frame mounted) engine oil filter adapter.
Tighten the bolt to 35 N.m (26 lb ft).
