Hombre S Regular Cab 4WD V6-4.3L (1999)
4. Install the remote engine oil filter lines support clamp bolt.
Tighten the bolt to 10 N.m (89 lb in).
5. Install new seals to the engine oil cooler lines at the remote (frame mounted) engine oil filter adapter.
6. Install the bolt attaching the engine oil cooler lines to the remote (frame mounted) engine oil filter adapter.
Tighten the attaching bolt to 35 N.m (26 lb ft).
Important: When performing the following procedure, do not reuse the old retaining rings. Replace the old retaining rings with new ones.
7. Do not install the new retaining ring onto the connector by pushing the retaining ring down over the connector.
8. Install a new retaining ring (E - clip) into each quick connector at the radiator engine oil cooler inlet and outlet by following the next three steps.
