Hombre S Regular Cab 4WD V6-4.3L (1999)
Tighten the AIR reactor pipe bracket nut to 41 N.m (30 lb ft).
6. Install the drive belt.
7. Install the EVAP canister purge solenoid valve.
8. Connect the vacuum brake booster hose.
9. Connect the vacuum hose to the intake manifold, if equipped with A/C.
10. Install the PCV hose assembly to the intake manifold and the valve rocker arm cover.
11. Install the fuel supply and return pipes to the rear of the intake manifold.
12. Install the exhaust gas recirculation (EGR) valve inlet pipe to the intake manifold and the exhaust manifold.
1. Tighten the EGR valve inlet pipe intake manifold nut to 25 N.m (18 lb ft).
2. Tighten the EGR valve inlet pipe exhaust manifold nut to 30 N.m (22 lb ft).
3. Tighten the EGR valve inlet pipe clamp bolt to 25 N.m (18 lb ft).
Important: In order to install the distributor for the correct engine timing, position the engine to number one cylinder top dead center.
