Hombre S Regular Cab 4WD V6-4.3L (1999)
22. Install the accelerator cable bracket to the intake manifold and the throttle body.
Tighten the accelerator cable bracket studs and nuts to 12 N.m (106 lb in).
23. Install the accelerator control cable to the bracket and the throttle shaft.
24. Install the cruise control cable, if equipped to the bracket and the throttle shaft.
25. Install the water pump inlet hose to the intake manifold.
26. Install the heater hose to the intake manifold.
27. Install the radiator inlet hose to the water outlet.
28. Fill the cooling system.
29. Install the air cleaner assembly.
30. Install the air cleaner outlet duct to the throttle body.
31. Connect the battery negative cable.