Hombre S Regular Cab 4WD V6-4.3L (1999)
License Plate Bulb: Service and Repair
License Lamp Replacement (W/O Step Bumper)
Removal Procedure
1. Ensure that the headlamp switch is in the OFF position.
2. Ensure that the ignition switch is in the LOCK position.
3. Remove the screws that retain the license plate lamp to the license plate bracket.
4. Remove the license plate lamp from the license plate bracket.
5. Rotate the bulb and socket 1/4 turn counter-clockwise in order to remove the bulb and socket from the license plate lamp.
6. Remove the bulb from the socket.
7. Disconnect the electrical connector.
8. Remove the license plate lamp from the vehicle.
Installation Procedure
1. Install the license plate lamp to the vehicle.
2. Connect the electrical connector.
3. Install the bulb to the socket.
4. Rotate the bulb and socket 1/4 turn clockwise in order to install the bulb and socket to the license plate lamp.
5. Install the license plate lamp to the licence plate bracket.
NOTE: Refer to Fastener Note in Service Precautions.
6. Install the screws that retain the license plate lamp to the license plate bracket.
Tighten
Tighten the screws to 1.4 N.m (12 lb in).