Hombre S Regular Cab 4WD V6-4.3L (1999)
License Plate Bulb: Service and Repair
License Lamp Replacement (Filler Panel)
Removal Procedure
1. Ensure that the headlamp switch is in the OFF position.
2. Ensure that the ignition switch is in the LOCK position.
3. Rotate the bulb and socket 1/4 turn counter-clockwise in order to remove the bulb and socket from the vehicle.
4. Remove the bulb from the socket if being replaced.
5. Remove the lens retaining clip from the license plate lamp
6. Remove the lens from the filler panel.
Installation Procedure
1. Install the lens to the filler panel.
2. Install the lens retaining clip to the license plate lamp.
3. Install the bulb to the socket.
4. Rotate the bulb and socket 1/4 turn clockwise in order to install the bulb and socket to the license plate lamp.
