Hombre S Regular Cab 4WD V6-4.3L (1999)
2. Compress the shaft lock shield assembly (2)using J 23653-SIR.
3. Remove the bearing retainer (1) from the steering shaft assembly.
4. Discard the bearing retainer (1).
5. Remove J 23653-SIR from the steering shaft assembly.
6. Remove the following parts from the steering shaft assembly:
1. The shaft lock shield assembly (4).
2. The turn signal cancel cam assembly (3).
3. The upper bearing spring (2).
4. The thrust washer (1).
T/S Can. Cam, Bearing Thrust Washer - Assemble (Floor Shift)
Assembly Procedure
Tools Required
-
J 23653-SIR Lock Plate Compressor
1. Install the following parts onto the steering shaft assembly:
