Hombre S Regular Cab 4WD V6-4.3L (1999)
1. The thrust washer (1).
2. The upper bearing spring (2).
3. Lubricate the turn signal cancel cam assembly (3) with lithium grease.
4. The turn signal cancel cam assembly (3).
5. The shaft lock shield assembly (4).
2. Compress the shaft lock shield assembly (2) using J 23653-SIR.
3. Install the new bearing retainer (1) onto the steering shaft assembly.
4. Firmly seat the bearing retainer (1) into the groove on the steering shaft assembly.
5. Remove J 23653-SIR from the steering shaft assembly.
6. Install the SRS coil assembly.
