isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Distributor, Ignition|Removal and Installation|Page 1172 > < Distributor, Ignition|Removal and Installation|Page 1170
Page 8
background image

12. Install the ignition coil wire.

The wire must not touch anything like the dip stick, rubbing will make a ground/short after time of use.

IMPORTANT:  If the Malfunction Indicator lamp is turned on after installing the distributor, and a DTC P1345 is found, the distributor has been
installed incorrectly.

13. Repeat Installation Procedure 2 if Malfunction Indicator lamp is turned on after installing the distributor.
14. Install the engine cover, if equipped.

Distributor, Ignition|Removal and Installation|Page 1172 > < Distributor, Ignition|Removal and Installation|Page 1170