Hombre S Regular Cab 4WD V6-4.3L (1999)
44.
Remove the PCV clean air tube from the air inlet tube and set aside.
45.
Remove the bonnet from the throttle body, and set aside.
46.
Remove the ignition wires 1, 3, and 5 from the distributor cap.
47.
Remove the brake booster vacuum hose and connector from the intake manifold.
48.
Bleed the residual pressure from the J 44466-12.
49.
Remove J 44466-13 (1) and J 44466-12 (2) from the metering body. (Figure 9)
50.
Remove J 44466-13 (1), clamp (2), and J 44466-11 (4), from the fuel pipe (3). (Figure 10)
51.
Install the fuel pipe (3) to the metering body. Make sure that all of the 0-rings (6 and 8), washers (7), and spacers (5) are present and in their
proper position. (Figure 11)
