Hombre S Regular Cab 4WD V6-4.3L (1999)
Fuel Line Coupler: Service and Repair
Metal Collar
REMOVAL
Tools Required
J 37088 Tool Set, Fuel Line Quick-Connect Separator
IMPORTANT: Relieve the fuel system pressure before servicing any fuel system connection.
1. Slide the dust cover from the quick-connect fitting.
2. Grasp both sides of the fitting. Twist the female connector 1/4 turn in each direction to loosen any dirt within the fitting.
3. CAUTION: Wear safety glasses when using compressed air, as flying dirt particles may cause eye injury.
Blow dirt out of the fitting using compressed air.
4. Choose the correct tool from J 37088 Tool Set for the size of the fitting. Insert the tool into the female connector, then push inward to release the
locking tabs.