Hombre S Regular Cab 4WD V6-4.3L (1999)
9. Connect the breather tube to the air cleaner outlet duct.
10. Connect the IAT sensor connector.
11. IMPORTANT: The accelerator pedal should operate freely without binding between closed and wide open throttle.
Check the accelerator pedal operation.
12. Turn ON the ignition leaving the engine OFF.
13. Using a scan tool, observe the parameter for the TP sensor.
14. Depress the accelerator pedal to the floor.
15. Release the accelerator pedal.
16. Verify the throttle position has gone from 0% to 100% and back to 0%.