Hombre S Regular Cab 4WD V6-4.3L (1999)
7. Remove the connector position assurance (CPA) from the driver yellow 2-way connector located at the base of the steering column.
8. Disconnect the driver yellow 2-way connector located at the base of the steering column.
9. Open the instrument panel compartment door, Lift, stop and allow door to fully open.
10. Remove the connector position assurance (CPA) from the passenger yellow 2-way connector located behind the glove box.
11. Disconnect the passenger yellow 2-way connector located behind the glove box.
Enabling the SRS
1. Remove the key from the ignition switch.
2. Connect the passenger yellow 2-way connector located behind the glove box.
3. Install the connector position assurance (CPA) to the passenger yellow 2-way connector located behind the glove box.
