Hombre S Regular Cab 4WD V6-4.3L (1999)
4. Close the instrument panel compartment door.
5. Connect the driver yellow 2-way connector located at the base of the steering column.
6. Install the connector position assurance (CPA) to the driver yellow 2-way connector located at the base of the steering column.
7. Install the knee bolster. Refer to knee Bolster Replacement in Instrument Panel, Gauges and Console.
8. Install the LH sound insulator, if equipped. Refer to Closeout/Insulator Panel Replacement Left in instrument Panel, Gauges and Console.
9. Install the SIR fuse to the IP fuse block.
10. Staying well away from both air bags, turn the ignition switch to the RUN position.
1. The AIR BAG warning lamp will flash 7 times.
2. The AIR BAG warning lamp will then turn OFF.
11. Perform the SRS Diagnostic System Check if the AIR BAG Warning Lamp does not operate as described.
