Hombre S Regular Cab 4WD V6-4.3L (1999)
CAUTION: When you are carrying an undeployed inflator module:
-
Do not carry the inflator module by the wires or connector on the inflator module.
-
Make sure the bag opening points away from you.
When you are storing an undeployed inflator module, make sure the bag opening points away from the surface on which the inflator rests. When
you are storing a steering column, do not rest the column with the bag opening facing down and the column vertical. Provide free space for the air
bag to expand in case of an accidental deployment. Otherwise, personal injury may result.
Installation Procedure
1. Connect the electrical connector and the CPA retainer.
2. Connect the inflator module.
3. Connect the electrical connector.
4. Connect the SRS lead wire to the clip on the steering wheel.
5. Connect the SRS lead wire to the clip on the inflator module.
Important: Make sure that the SRS wires do not get pinched during installation of the inflator module.
6. Install the inflator module by pressing the inflator module firmly onto the steering wheel to engage and latch the leaf springs on the four notched
Pins.
7. Enable the SRS system. Refer to Enabling the SRS.
