Hombre S Regular Cab 4WD V6-4.3L (1999)
12. Seat the tapers using J 29193 or J 29194.
Tighten
Tighten J 29193 or J 29194 to 54 N.m (40 lb ft).
13. Remove J 29193 or J 29194 from inner tie rod ball stud.
14. Repeat steps 12 and 13 for the opposite side.
15. Install the new nuts to the inner tie rod ball studs at the relay rod.
Tighten
Tighten the inner tie rod ball stud nuts to 47 N.m (35 lb ft).
16. Install the differential carrier shield.
17. Install the differential carrier shield mounting bolts
Tighten
Tighten the differential carrier shield mounting bolts to 25 N.m (19 lb ft).
18
Install the steering linkage shield.
19. Lower the vehicle.
20. Adjust the front toe.