Hombre S Regular Cab 4WD V6-4.3L (1999)
5. Install the relay rod ball stud the the pitman arm.
Ensure that the seal is on the stud.
6. Seat the taper using J 29193 or J 29194.
Tighten
Tighten J 29193 or J 29194 to 54 N.m (40 lb ft).
7. Remove J 29193 or J 29194 from the pitman arm ball stud.
8. Install the new nut to the pitman arm ball stud at the relay rod.
Tighten
Tighten the pitman arm ball stud nut to 83 N.m (61 lb ft).
9. Connect the steering shock absorber to the relay rod.
10. Install the steering shock absorber ball stud nut at the relay rod.
Tighten
Tighten the steering shock absorber ball stud nut to 63 N.m (46 lb ft).
11. Install the inner tie rod ball studs to the relay rod.
Ensure the seal is on the stud.