Hombre S Regular Cab 4WD V6-4.3L (1999)
Tighten
Tighten the power steering rear bracket nut and the power steering pump front mounting nut to 41 N.m (31 lb ft).
5. Install the filler neck tube.
Tighten
Tighten the neck tube bolt to 20 N.m (15 lb ft).
6. Connect the power steering return hose to the power steering pump.
7. Raise and suitably support the vehicle.
8. Connect the power steering pressure hose to the power steering pump.
9. Install steering Linkage shield.
10. Lower the vehicle.
11. Place the power steering pump pulley on the end of the power steering pump shaft.
