Hombre S Regular Cab 4WD V6-4.3L (1999)
12. Install J 25033-B.
Ensure that the pilot bolt bottoms in the shaft by turning the nut to the top of the pilot bolt.
13. Hold the pilot bolt.
14. Turn the nut counterclockwise
15. Install the power steering pump pulley.
16. Install the pulley (1) flush against the end of the power steering pump shaft (2), with an allowable variance of 0.25 mm (0.010 in).
17. Remove the fan clutch from the water pump.
18. Install the Drive belt.
19. Remove the upper fan shroud.
20. Fill the power steering system.
21. Bleed the system.
22. Inspect the hoses for clearance.
