Hombre S Regular Cab 4WD V6-4.3L (1999)
14. Remove the steering gear mounting bolts and the washers from the frame.
15. Remove the steering gear.
16. Remove the pitman arm. Refer to Pitman Arm Replacement (4WD) in Steering Linkage.
Installation Procedure
Tools Required
-
J 29193 Steering Linkage Installer (12 mm)
-
J 29194 Steering Linkage Installer (14 mm)
1. Install the pitman arm. Refer to Pitman Arm Replacement (4WD) in Steering Linkage. See: Pitman Arm
2. Install the steering gear.
3. Install the Power Steering gear to the frame washers and mounting bolts.
Tighten
Tighten the power steering gear to frame mounting bolts to 75 N.m(55 lb ft).
4. Connect the relay rod to the pitman arm ball stud. Ensure the seal is on the stud.