Hombre S Regular Cab 4WD V6-4.3L (1999)
5. Seat the taper using J 29193or J 29194.
Tighten
Tighten J 29193 or J 29194 to 62 N.m(48 lb ft).
6. Remove J 29193or J 29194 from the pitman arm ball stud.
7. Install the new nut to the pitman arm ball stud at the relay rod.
Tighten
Tighten the pitman arm ball stud nut at the relay rod to 83 N.m(61 lb ft).
8. Install differential carrier shield.
9. Install the differential carrier shield mounting bolts.
10. Install the steering Linkage shield.
11. Lower the vehicle.
12. Install the lower intermediate shaft to the power steering gear.
13. Ensure that the alignment marks line up.
14. Install the lower intermediate shaft coupling bolt.
Tighten
Tighten the lower intermediate shaft coupling bolt to 35 N.m(26 lb ft).