Hombre S Regular Cab 4WD V6-4.3L (1999)
Steering Wheel: Service and Repair
Inflator Module Replacement
Removal Procedure
CAUTION: When you are performing service on or near the SRS components or the SRS wiring, you must disable the SRS system. Refer to Disabling
the SRS. Failure to follow the correct procedure could cause air bag deployment, personal injury, or unnecessary SRS repairs.
CAUTION: Refer to SIR Handling Caution in Service Precautions.
1. Disable the SRS system. Refer to Disabling the SRS.
2. Turn the ignition switch to the ON position to unlock the steering wheel.
3. Turn the steering wheel 90 degrees from the straight-ahead position in order to gain access to the access holes behind the steering wheel.
4. Insert a screwdriver into each access hole and push the leaf spring to release the pin that retains the inflator module.
