Hombre S Regular Cab 4WD V6-4.3L (1999)
6. Remove the oil pass cover bolt.
7. Remove the oil pass cover.
8. Remove the spacer plate.
9. Remove the spacer plate gaskets.
10. Remove the 3-4 accumulator spring.
11. Remove the piston oil seal ring.
12. Remove the 3-4 accumulator piston, and the pin.
13. Inspect the accumulator assembly.
Installation Procedure
Tools Required
-
J 25025-B Pump and Valve Body Alignment Pin Set
-
J 36850 Transjel Reg Transmission Assembly Lubricant