Hombre S Regular Cab 4WD V6-4.3L (1999)
1. Install the 3-4 accumulator pin into the transmission case.
2. Install the 3-4 accumulator piston onto the pin. The piston legs must face the valve Body.
3. Install the 3-4 accumulator piston oil seal ring.
4. Install the 3-4 accumulator piston spring.
5. Install the J 25025-B to the transmission case.
6. Install the case gasket and the valve Body gasket to the spacer plate. The case gasket is identified by a Cycles if. The valve Body gasket is
identified by a The DTC.
7. Use the J 36850 in order to retain the gaskets to the spacer plate.
8. Install the spacer plate and the gaskets to the transmission case.
