Hombre S Regular Cab 4WD V6-4.3L (1999)
9. Install the oil pass cover and the oil pass cover bolts.
Tighten
Tighten the bolts to 11 N.m (97 lb in).
10. Install the 12 accumulator piston with the piston legs facing toward the case.
11. Install the oil seal ring to the accumulator cover.
12. Install the 1-2 accumulator spring onto the piston.
13. Install the 1-2 accumulator cover and the cover bolts.
Tighten
Tighten the bolts to 11 N.m (97 lb in).
14. Remove the J 25025-B from the transmission case.
15. Install the control valve Body. Refer to Valve Body.
See: Valve Body