Hombre S Regular Cab 4WD V6-4.3L (1999)
Pinion Flange: Service and Repair
Front
Drive Pinion Yoke Replacement
Removal Procedure
Tools Required
J 8614-01 Pinion Flange Remover
Important:
Note the positions and accurately reference mark all of the following driveline components relative to the disassembly of the propeller shaft and
axles:
-
The propeller shafts
-
The drive axles
-
The pinion flanges
-
The output shafts
Follow the published specifications and torque values, as well as any measurements obtained prior to disassembly. Reassemble all of the
components in the exact relationship to each other during removal
1. In order to free the steering Linkage for movement, unlock the steering column.
2. Raise the vehicle. Support the vehicle with safety stands.
3. Remove the battery negative cable.
4. Remove the front underbody shields, if equipped.
5. Remove the left front underbody shield bracket.
6. Accurately mark the propeller shaft and pinion flange.
7. Remove the bolts from the propeller shaft flange to the front axle.
8. Remove the front propeller shaft.
9. Mark the following components in order to maintain the same preload torque upon assembly:
-
The pinion Flange
-
The pinion Shaft
-
The pinion Flange Nut