Hombre S Regular Cab 4WD V6-4.3L (1999)
10. Remove the pinion flange nut and the washer. Use the J 8614-01 in order to secure the flange.
11. Remove the pinion flange using the J 8614-01. Provide a suitable container in order to catch the lubricant.
Installation Procedure
Tools Required
J 8614-01 Pinion Flange Holder
1. Apply a special seal lubricant to the outside of the pinion flange.
2. Install the new pinion flange.
3. Install the washer and a new nut using the J 8614-01.
Tighten
Tighten the nut to the same position as marked during removal. Continue to tighten the nut 10 degrees after the marks.
Important: Align the marks drawn during removal Reassemble the components in the same position.
4. Install the propeller shaft.
5. Install the bolts to the flange.
Tighten
Tighten the bolts to 75 N.m (55 lb ft).
6. Inspect the axle lubricant level. Add lubricant as necessary.
