Hombre S Regular Cab 4WD V6-4.3L (1999)
Seals and Gaskets: Service and Repair
Transmission Housing Oil Seal Replacement
Removal Procedure
Tools Required
-
J 36825 Output Shaft Oil Seal Remover
-
J 23907 Slide Hammer
1. Raise the vehicle.
2. Remove the rear propeller shaft.
3. Using J 36825 and J 23907 pry the seal out of the extension housing.
Installation Procedure
Tools Required
-
J 36502-2A Output Shaft Seal Protector/Installer
-
J 36502 Extension Housing Seal Installer
1. Position J 36502-2A over the output shaft.
2. Using J 36502 install the rear output shaft seal.