isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Shifter M/T > < Seals and Gaskets, M/T|Service and Repair
Page 2
background image

3. Remove J 36502-2A from the output shaft.

4. Fill the space between the seal lips with grease GM P/N 1052497 or equivalent.
5. Install the rear propeller shaft. 
6. Check the transmission oil level. Refer to Manual Transmission Fluid; Service and Repair; Fluid Replacement.
7. Lower the vehicle.

Shifter M/T > < Seals and Gaskets, M/T|Service and Repair