Hombre S Regular Cab 4WD V6-4.3L (1999)
Shifter M/T: Service and Repair
Shift Lever
Removal Procedure
1. Remove the shift lever from the shift tower.
2. Do not remove the shift lever adjusting nut.
3. Remove the screws securing the boot to the panel.
4. Remove the boot from the shift tower.
Installation Procedure
1. Install the boot over the shift tower and secure to the panel with the screws.
Tighten
Tighten the screws to 2 N.m (18 lb in).
2. Install the shift lever to the shift tower.
If required, center the shift lever with the adjusting nut.
Tighten
Tighten the adjusting nut to 48 N.m (35 lb ft).
