Hombre XS Space Cab L4-2.2L CPC (1997)
^
First to 8 Nm (6 ft. lbs..)
^
Second to 16 Nm (12 ft. lbs..)
4. New EBCM gasket to EBCM.
NOTE:
^
Do not use RTV or any other sealant on the gasket or mating surfaces.
5. EBCM to BPMV.
^
Inspect Gasket to verify proper alignment.
6. Four new EBCM Torx bolts.
^
Tighten Four bolts to 5 Nm (3 ft. lbs.) in an X pattern.
7. Three 13 mm EHCU to base bracket retaining bolt.
^
Tighten three 13mm bolts to 9 Nm (7 ft. lbs.)
8. EHCU on to the vehicle.
9. Front and rear brake pipe to combination valve.
^
Tighten brake pipe fittings to 24 Nm (18 ft. lbs.)
10. Three hydraulic lines to tube adapters on BPMV.
11. The 2-way connector to combination valve.
12. Four electrical connectors EBCM.
13. Two 13 mm weld/shield nuts fastening the shield and the BPMV to the EHCU mounting Bracket
14. Lower vehicle.
15. Negative battery cable.
16. Bleed the brake system. Refer to Antilock Brake System, Service and Repair.
