Hombre XS Space Cab L4-2.2L CPC (1997)
^
Do not use any type of metal tool.
6. Bleeder valve.
Clean
-
Bleeder valve, caliper bore, caliper passages, and piston with denatured alcohol. Use dry, filtered, compressed air to dry parts and blow out
passages.
Inspect
-
Piston for scoring, corrosion, and damage to the chrome plating. Replace if any of these conditions are found.
-
Caliper bore for scoring, pitting, or corrosion. Use crocus cloth to polish out any light corrosion. Replace the caliper if the corrosion cannot
be removed.
INSTALL
Tools Required:
^
J 26267 Piston Seal Installer
1. Lubricate new piston seal, caliper bore, and piston with clean brake fluid.
2. Piston seal.
^
Make sure the seal is not twisted in the caliper bore groove.
3. Boot on piston.
4. Piston.
5. Boot into caliper housing bore using J 26267.
6. Bleeder valve.
^
Tighten bleeder valve to 8.5 Nm (75 inch lbs.).