Hombre XS Space Cab L4-2.2L CPC (1997)
Vacuum Brake Booster: Service and Repair
Removal and Installation
vacuum Booster
REMOVE OR DISCONNECT
1. Apply parking brake.
2. Nuts from master cylinder.
3. Master cylinder.
^
Support the master cylinder.
4. Vacuum hose from booster.
5. Retainer and switch from brake pedal.
6. Pushrod.
7. Nuts from vacuum booster.
^
The nuts must be removed from inside the vehicle.
8. Booster assembly.
9. Gasket.
Booster Pushrod
INSTALL OR CONNECT
1. Gasket.
2. Vacuum booster assembly.
3. Nuts to vacuum booster.
^
Tighten nut to 36 Nm (27 ft. lbs.).
4. Pushrod.
5. Switch and retainer to brake pedal.
6. Vacuum hose.
7. Gauge the booster rod as follows.
Measure
Tool Required:
^
J 37839 or a Pushrod Height Gauge
