isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Vacuum Brake Booster|Removal and Installation|Page 3939 > < Vacuum Brake Booster|Removal and Installation
Page 2
background image

a. Gauge the booster with 85 kPa (25 in. hg) vacuum or maximum engine vacuum.
b. Check the maximum and minimum rod length using J 37839.
c. If the piston rod is not within limits, obtain a service adjustable piston rod and adjust the rod to the correct length.

8. Master cylinder.
9. Nuts to master cylinder.

^

Tighten nuts to 36 Nm (27 ft. lbs.).

Vacuum Brake Booster|Removal and Installation|Page 3939 > < Vacuum Brake Booster|Removal and Installation