Hombre XS Space Cab L4-2.2L CPC (1997)
Camshaft: Service and Repair
Removal
1. Disconnect the negative battery cable.
2. Raise the vehicle.
3. Drain the cooling system.
4. Remove the exhaust pipe from the exhaust manifold.
5. Lower the vehicle.
6. Evacuate the air conditioning system. Refer to Heating and Air Conditioning.
7. Remove the radiator grille assembly. Refer to Body and Frame.
8. Remove the radiator and A/C condenser (if equipped) as a unit from the vehicle.
9. Remove the accessory drive belt.
10. Remove the cylinder head.
11. Remove the valve lifter retainer.
12. Remove the valve lifters.
NOTE: Store the valve lifters in order so that they can be reinstalled in the same order.
13. Rotate the crankshaft until the number 1 piston is at Top Dead Center (TDC) on the compression stroke.
