Hombre XS Space Cab L4-2.2L CPC (1997)
INSTALLATION
1. Install the valve lifters into the lifter bores.
^
Align the flat sides (top) of the lifters with the flat sides of the anti-rotation brackets.
^
When properly aligned, the flat side of each lifter is aligned parallel to the anti-rotation bracket.
^
The roller at the bottom of each lifter is aligned parallel to the camshaft lobe.
2. Install the anti-rotation brackets on the valve lifters.
3. Install the screws that retain the anti-rotation brackets.
^
Tighten the anti-rotation bracket screws to 11 Nm (97 inch lbs.).
4. Install the cylinder head.
