Hombre XS Space Cab L4-2.2L CPC (1997)
Control Assembly: Service and Repair
Control Panel Illumination Bulbs
Control Assembly Lamp Bulb
Remove or Disconnect
1. Heater control assembly.
-
Pull the heater control assembly out far enough to reach the control assembly lamp bulb socket.
2. Lamp bulb and socket.
3. Lamp bulb from socket.
-
Pull the lamp bulb straight out from the socket.
Inspect
-
Control assembly lamp bulb socket for corrosion and damage. Clean or replace as necessary.
-
Wires for damage and secure connection to the lamp bulb socket. Repair or replace as necessary.
Install or Connect
1. New lamp bulb.
-
Push the lamp bulb straight into the socket.
2. Lamp bulb and socket.
3. Heater control assembly.
-
Perform "Heater Function Test."