isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Arming Sensor|Page 4820 > < Arming Sensor|Page 4818
Page 1
background image

Impact Sensor: Service and Repair
Discriminating Sensor

REMOVAL PROCEDURE

CAUTION:  Be very careful when handling the sensors during service procedures. Never strike the sensors. Never Jar the sensors. These
actions could result in personal injury, or improper operation of the Supplemental Restraint System (SRS). Carefully tighten all of the
sensors, and all of the mounting bracket bolts to ensure proper operation. Never power up the Supplemental Restraint System (SRS) when
any one of the sensors is not rigidly attached to the vehicle. An unattached sensor could be easily activated causing the deployment of the air
bag.

Use caution to ensure proper location of sensor on the mounting brackets. Do not for any reason modify the keying of the sensors through the wiring
harness connectors.

Supl Rst Front End Discriminating Sensor

1. Disable the Supplemental Restraint System (SRS). Refer to Disabling the SRS.
2. Disconnect the Connector Position Assurance (CPA) lock from the connector.

3. Disconnect the connector.

Arming Sensor|Page 4820 > < Arming Sensor|Page 4818