isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Warning Lamp Comes "ON" Steady|Page 4842 > < Warning Lamp Comes "ON" Steady|Page 4840
Page 5
background image

18. This test determines whether the malfunction is an open in the SRS Indicator circuit or an open in the instrument cluster.
22. This test determines where the open in circuit 358 is located.
26. This test will determine if the blown fuse was the result of fatigue or a circuit short.
28. This test determines whether the short-to-ground is due to a short in the wiring or a malfunctioning DERM.
34. This test checks for malfunctions due to the following conditions:

^

An open power feed circuit from the GAUGES fuse to the instrument cluster.

^

An open power feed to the GAUGES fuse.

When measurements are requested in this chart use J 39200 Digital Multimeter with correct terminal adapter from J 35616-A Connector Test
Adapter Kit. When a check for proper connection is requested, refer to Intermittents and Poor Connections. When a wire, connector or terminal
repair is requested, use J 38125-A Terminal Repair Kit and refer to Wiring Repair.

Warning Lamp Comes "ON" Steady|Page 4842 > < Warning Lamp Comes "ON" Steady|Page 4840