Hombre XS Space Cab L4-2.2L CPC (1997)
-
Tighten the bolts to specifications, then retest.
11. The starter must be shimmed toward the flywheel if the following is true:
-
The pinion clearance is more than 1.5 mm (0.06 in).
-
The starter whines only during cranking.
-
Add 0.33 mm (0.013 in) shims between the outboard starter mounting pad and the engine.
-
Loosen the inboard bolt.
-
Remove the outboard bolt.
-
Install the shim.
-
Install the outboard bolt.
-
Tighten both bolts to specifications, then retest.
-
Do not add more than four shims total.
12. Ensure that the starter mounting bolts are tighten to 43 N.m (31 lb. ft.).
