Hombre XS Space Cab L4-2.2L CPC (1997)
14. Inspect the field coils for grounds.
-
Connect the two leads from the "growler" between the field frame and the field connector.
-
Be sure that the brush ends do not contact the field frame.
-
If the test lamp lights, the field coils are grounded.
Install a new field and frame assembly.
15. Inspect the field coils for opens.
-
Connect the two leads from the "growler" between the field connector and each of the positive brushes.
-
If the test lamp does not light at both brushes, then the fields are open.
16. Inspect the field coils for shorts.
-
Shorts are indicated if the starter motor runs poorly after all other inspection procedures have been completed.
-
The frame and field coils must be replaced as an assembly, if they are found to be shorted.
17. Inspect the drive assembly (clutch) by turning the drive pinion in the cranking direction.
-
If the drive pinion turns roughly in the cranking direction, replace the complete overrunning clutch assembly.
-
If the drive pinion slips in the cranking direction, replace the complete overrunning clutch assembly.
18. Inspect the solenoid for grounds using a self-powered test lamp J21008-A.
