Hombre XS Space Cab L4-2.2L CPC (1997)
1. Axle into the vehicle using a hoist.
2. Vent hose to the axle housing.
3. U-bolts and anchor plates.
4. Nuts and washers.
-
Tighten:
Nuts to 100 Nm (74 ft. lbs.).
5. Brake pipes to the backing plate.
6. Parking brake cables(s).
7. Brake pipes at the axle housing.
-
Bleed the brake system.
8. Propeller shaft.
-
Line up the previously made marks on the propeller shaft with the marks on the pinion flange.
9. Retainers and bolts to pinion flange.
-
Tighten:
Bolts to 45 Nm (33 ft. lbs.).
10. Shock absorbers to the anchor plates.
11. Washer and nuts.
-
Tighten:
Nuts to 84 Nm (62 ft. lbs.).
12. Rear drums, tires and wheels.
13. Refill axle housing. Add lubricant to a level within 9.5 mm (3/8 inch) of the filler hole.