isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Driver Air Bag Assembly|Page 4127 > < Driver Air Bag Assembly|Page 4125
Page 8
background image

5. Short the two SRS deployment harness (1) leads together using one banana plug seated into the other.
6. Connect the appropriate pigtail adapter (2) to the SRS deployment harness (1).
7. Remove the supplemental restraint steering wheel module.

See: 

6. Remove the horn lead from the back of the module, if equipped.
9. Remove the redundant steering wheel control leads from the back of the module, if equipped.

10. Remove all horn/steering wheel control buttons from the module, if equipped.

Warning:  When you are carrying an undeployed inflator module:
- Do not carry the inflator module by the wires or connector on the inflator module
- Make sure the bag opening points away from you

When you are storing an undeployed inflator module, make sure the bag opening points away from the surface on which the inflator module
rests. When you are storing a steering column, do not rest the column with the bag opening facing down and the column vertical Provide free
space for the air bag to expand in case of an accidental deployment. Otherwise, personal injury may result.

11. Place the module with the vinyl trim cover facing up and away from the surface on a work bench.

Driver Air Bag Assembly|Page 4127 > < Driver Air Bag Assembly|Page 4125