Hombre XS Space Cab 2WD V6-4.3L (1998)
12. Clear a space on the ground about 1.85 M (6 ft) in diameter for deployment of the module. If possible, use a paved, outdoor location free of
activity. Otherwise, use a space free of activity on the shop floor. Make sure you have sufficient ventilation.
13. Make sure no loose or flammable objects are in the area.
14. Place the module in the space with the vinyl trim cover facing up.
15. Extend the SRS deployment harness and adapter to full length from the module.
16. Place a 12V minimum/2A minimum power source (i.e., vehicle battery) near the shorted end of the harness.
17. Connect the module (1) to the adapter (2) on the SRS deployment harness (3).
18. Firmly seat the adapter into the module connector.
19. Clear the area of people.